JOINWE industrial videoscopes: JW-F, JW-G and JW-T series.
Professional videoendoscopes for remote visual inspection distributed in Italy by PITECH: motorized or mechanical 360° joystick, interchangeable probes Ø 0.85–6.0 mm, IP67, 5.5'' OLED display and 3D measurement. See and document where direct access is not possible.
Manufacturer: JOINWEShenzhen Joinwe Smart Co., Ltd — represented and distributed in Italy by PITECH Industrial Solution
JOINWE industrial videoscopes cover the full range of remote visual inspection (RVI): from the tightest access to 3D measurement of defects. PITECH supports the choice of series and probe based on the real application, with technical-commercial support in Italy.
JW-F series • Motorized
JOINWE JW-F — motorized 360° videoscope
The JW-F series integrates a motorized joystick with 360° articulation and assisted functions (fast/slow mode, follow lock, guided stepping, fixed-point freedom, overload protection) for precise tip control in complex geometries. RK3588 processor and 5.5'' OLED display.
Display: 5.5'' OLED, RK3588 processor
Articulation: motorized 360° joystick
Probe diameters: 2.2 / 2.8 / 4.0 / 6.0 mm
View: forward / side
Resolution: up to 1 MP
Probe protection: IP67 (10 m immersion)
Illumination: LED / fiber ≥100,000 Lux
Storage: 128G + 64G, PDF report
Battery: ≥4 h, 30 min continuous video
Measurement: scalar
JW-F: unit with OLED display and probeKit in hard case with accessories
The JW-G series offers the same platform performance as the JW-F but with a mechanical 360° joystick and the widest probe range, starting at Ø 0.85 mm for the tightest accesses. Ideal when you need to reach very small openings with direct control.
The JW-T series adds binocular stereo 3D measurement with GPU processing and point cloud, on a 7'' IPS LCD display. It enables distance, depth, point-to-line and area measurements directly in the field, for reliable dimensional assessment of defects.
Display: 7'' IPS LCD
Measurement: binocular stereo 3D (GPU, point cloud)
Modes: distance, depth, point-to-line, area
Probe diameter: 4.0 mm
Probe protection: IP67 (10 m immersion)
Illumination: LED / fiber ≥100,000 Lux
JW-T: unit with 3D measurement on screenJW-T 3D series
JW-T model: T40020FN (4 mm, 3D measurement).
Common features
Shared platform across all JOINWE series.
The three series share the JOINWE optical and mechanical architecture, with interchangeable probes and components designed for intensive industrial use.
Sapphire lens
Optics protected by an anti-scratch, high-temperature sapphire lens, to keep images sharp even in harsh environments.
Interchangeable probes
Interchangeable insertion tubes Ø 0.85–6.0 mm, with lengths from 0.5 to 12 m: the same unit covers different accesses and distances.
Tip articulation
Tip articulation up/down 150–170° to orient the optics and inspect walls, lateral detail and complex geometries.
IP67 protection
IP67 probe up to 10 m, resistant to weak acids and bases, petrol, diesel and oils: suitable for plants, engines and petrochemical.
Powerful illumination
LED or fiber-optic illumination beyond 100,000 Lux to reveal cracks, corrosion, deposits and fine damage.
Documentation and reports
Photo/video capture, measurement and PDF report generation for inspection traceability and maintenance decisions.
AerospaceTurbinesPipelinesCondensersPressure vesselsMachining / FoundryTanks and cylindersPetrochemicalAutomotiveEngines
Model table
JOINWE JW-F, JW-G and JW-T models.
Overview of models to guide the choice on diameter, length, illumination and view. Price is on request: PITECH prepares an evaluation tailored to the application.
Model
Probe Ø
Length
Illumination
View
Notes
F22010FN-H
2.2 mm
0.5–12 m
LED / fiber
Forward / side
JW-F motorized, scalar measurement
F28010FN
2.8 mm
0.5–12 m
LED / fiber
Forward / side
JW-F motorized, scalar measurement
F40020FM
4.0 mm
0.5–12 m
LED / fiber
Forward / side
JW-F motorized, scalar measurement
F60020FM
6.0 mm
0.5–12 m
LED / fiber
Forward / side
JW-F motorized, scalar measurement
G08505FN
0.85 mm
0.5–12 m
LED / fiber
Forward
JW-G mechanical, ultra-narrow access
G12010FN
1.2 mm
0.5–12 m
LED / fiber
Forward
JW-G mechanical
G18010DN
1.8 mm
0.5–12 m
LED / fiber
Forward / side
JW-G mechanical
G40020FM
4.0 mm
0.5–12 m
LED / fiber
Forward / side
JW-G mechanical, scalar measurement
G60020FM
6.0 mm
0.5–12 m
LED / fiber
Forward / side
JW-G mechanical, scalar measurement
T40020FN
4.0 mm
0.5–12 m
LED / fiber
Forward
JW-T, stereo 3D measurement, 7'' display
The length values indicate the range of interchangeable insertion tubes available for the JOINWE platform. The optimal configuration (diameter, length, view, illumination) should be defined on the real access and inspection objective.
FAQ
Frequently asked questions on JOINWE industrial videoscopes
What is the difference between JW-F, JW-G and JW-T?
The JW-F series has a motorized joystick with 360° articulation and assisted functions; the JW-G has a mechanical 360° joystick and the widest probe range (from 0.85 mm); the JW-T adds binocular stereo 3D measurement on a 7'' IPS display. All use interchangeable probes and a sapphire lens.
What probe diameters do JOINWE videoscopes offer?
JOINWE interchangeable probes range from Ø 0.85 mm up to 6.0 mm, with lengths from 0.5 to 12 m and forward, side or dual view, to suit different accesses and geometries.
Are they suitable for harsh environments?
Yes. The probe is IP67 (immersion up to 10 m, resistant to weak acids and bases, petrol, diesel and oils), with an anti-scratch, high-temperature sapphire lens, suitable for plants, engines, turbines and petrochemical.
Can I take measurements and reports?
Yes. The JW-F and JW-G series perform scalar measurement and generate PDF reports; the JW-T series adds 3D measurement (distance, depth, point-to-line, area) via binocular point cloud.
How do I request a quote for a JOINWE videoscope?
State probe diameter/access, length to reach, what you need to inspect and the operating environment. PITECH, JOINWE distributor in Italy, guides the most suitable configuration and prepares the evaluation. Use the form below, WhatsApp or email.
Application support
Technical support, installation and training.
Beyond the choice of JOINWE series and probe, PITECH supports the customer in defining the application project and coordinating the following steps with the manufacturer.
Solution configuration
Choice of series, probe diameter, length, view, illumination, accessories and software based on the application.
Start-up and installation
Coordination of commissioning, initial trials and integration into the inspection process.
Operator training
Usage training and connection with JOINWE for service, probes and spare parts.
Contact
Request an evaluation or a quote for a JOINWE videoscope.
If you need to buy or evaluate an industrial videoscope, PITECH Industrial Solution — JOINWE distributor in Italy — can help clarify the requirement, choose series and probe and turn the choice into an industrial project.
Application request
Tell us about the inspection to evaluate.
Send a request with probe diameter/access, length to reach, what you need to inspect and the operating environment.
Newsletter
Subscribe for industrial technology updates.
Updates on RVI inspection, material analysis, industrial automation, robotics and software solutions for more efficient and digital production processes.
